Cross Conveyor

Cross Conveyor

Packaging Configuration

Cross Conveyor Round

Introduction

  • Suitable for cream sandwich biscuits standing on edge in single slug for Pack size up to 200 Gr.
  • Suitable for various Feeding systems to suit individual customer requirement.
  • Feeding options to choose from operator side or opposite to operator side.
  • Single or Double pusher design available for optimum packing output.
  • Extended Infeed feeding conveyor for ease in manual feeding

GA Diagram

Technical Data Sheet

Specification Unit Limiting Values
Cut off Length MM 120 to 250
Wrapper width Max MM ≤ 280
Wrapper Diameter Max MM ≤ 300
Wrapper Wt. Max KG ≤ 20
Product sizes Min. MM Length 60   Width 40   Height 30
Max MM Length 150 Width 75 Height 70
Electric Power KW 5
Mechanical Packing Speed Max PPM 130 ( Depends on stack length)
Appx. M/c. Dimensions (w/o packing) METER L 4.3 W 1.6 (w/o cross conveyor) Ht 1.8
Appx. M/c. Wt. (w/o packing) KG 1550
  • The data given above for general guide line
  • Above parameters may vary depending on application
  • Pl contact us when product dimensions are on extreme side of given limits
  • Due to implementation of new developments, we reserve the right to change the specification without any prior notice.

Salient Features

  • All machines are user friendly
  • Reliable center and cross sealing.
  • Wrapper driven servo motor for ease in packet length changeover
  • Parts coming in contact with products are made from stainless steel or food grade plastic material
  • Temp. Control through PLC, eliminates need of separate temp. controller in panel
  • Two way Auto print mark correction through HMI
  • Machines are suitable for different tropical conditions.
  • Machines fitted with sealed lubricated bearings
  • In plant / at site training given to key personnel
  • 24 X 7 technical Support available

Standard Machine Features

  • Twin reel holder Machine reduces wrapper wastage & change over time.
  • Machine always stops in open jaw condition.
  • Packet length adjustment and print mark correction in synchronization with wrapper speed in m/c running condition.
  • Mounting brackets to adopt any type of coding device.
  • Ample inside Panel space reduces temp. Rise in panel.
  • Customer needs Feeding options available.
  • Machine is inbuilt with end gusseting system.
  • Touch screen HMI for ease in operation.
  • Zigzag knife pattern to enhance packet look.
  • Positive wrapper feed drive by Servo motor.

Optional Machine Features

  • Auto wrapper splicing for high speed machines.
  • A set of change parts to run additional new product on the same machine.
  • Extended infeed and outfeed
  • Adjustable and movable rest pads
  • Annual Preventive maintenance contract.
  • Stainless Guards, covers and panel
  • Auto roller closing / opening.
  • Double pusher arrangement available for increase in productivity
  • Possible to adjust desired Machine height with mobility